Fm200 Automatic Fire Extinguishing System Multi Zone Controlled
Parameter:
| No. | specification | Technical Parameter |
| 1 | Filling pressure | 4.2Mpa |
| 2 | Scale of Protective region for one zone | area:max single-zone is 800m2 volume:max single-zone is 3600m3 |
| 3 | Spraying time | ≤10s |
| 4 | Filling density | ≤950kg/m3 |
| 5 | power | DC24V/1.6A |
| 6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) |
| 7 | Condition of reserving room for container | temperature: -10~50℃, relative humidity: ≤97% |
| 8 | max working pressure | 5.3Mpa |
| 9 | min working pressure | 4.2Mpa |
Description:
Fm200(htc-227ea) is a kind of colorless and tasteless and
non-corrosive and electricity-insulating gas without residue and
pollution after extinguishing. And ODP of it is zero. It is a
friendly-environment gas to be used for extinguishing. Also,
because of such feature, it can be used in special place where
electrical fire is easy to happen.
Combined with extinguishing device and electronic accessories, the
whole system can be actuated automatically. It can monitor the
situation of protective region through detectors and then it can
also start the extinguishing device through solenoid actuator
automatically. So the whole system can achieve automation totally.
Therefore, it can avoid that there is no one who notice the fire
when it happens and it also saves much money for employment to
supervise the protective area.
Management of Multiple zones is also in the safe control of the
whole system. We can use one system to protect multiple zones
through selective valves. It can let the whole system alternative
aiming at different protective zone. Agent can be discharged into
where the fire happens. It will be very efficient to put out fire
in short time. One thing that need to mention, is that a little
room should be prepare to be as storage space for the whole system.
Applications:
Electronic computer room, a data processing center, expensive
medical equipment, industrial equipment, library, museum and art
gallery, clean room, anechoic chamber, emergency power facilities,
flammable liquid storage area, etc.
The place where the fire is easy to happen, like paint-spraying
production line, aging-electrical equipment, rolling machine,
printing machine, oil switch, oil immersed transformer, melt
impregnating tank, tank, large generators, drying equipment, cement
production process of pulverized coal, and the ship's engine room,
cargo hold, etc.
Competitive Advantage:
It is very efficient for you to protect your possession. Since it
is a system, it include extinguishing device to put out fire at
short time, specially, shorter than 10 second. It means all agent
will be discharged in so short time. Then it will be flooding
overall. In addition, it has time-delay mechanism. It is around 2
minute. It means when fire happens, there is enough time left to
evacuate people from hazardous place.
It can let multiple zones are protectively in the control of one
system. Then it will save much money for big and multiple zones.
Working principle:
1. A fire happens
2. Smoke/ heat detector feels the difference and send signal to
control panel
3. Control panel receives the signal and activates the alarm bell
to inform people to escape the room
quickly
4. Smoke / heat detector feels the difference and send signal back
to control panel ( Only both the smoke
and heat detector send back signal to the control panel that the
fire suppression will activate.)
5. A few seconds after receiving the signal, the control panel
starts the fm200 fire suppression system
6. Fm200 fire suppression system activates and put out fire in 10s.
