20L Hanging Fm200 Automatic Suppression System Heptafluoropropane
Parameter:
| No. | Specification | Technical Parameter |
| 1 | Filling pressure | 1.6Mpa |
| 2 | Spraying time | ≤8s |
| 3 | Working temperature | 0～50℃ |
| 4 | Starting mode | Electrical start or manual start |
Description:
A hanging fire suppression system, also known as a suspended fire
suppression system, is a fire protection system designed to detect
and suppress fires in specific areas or rooms. It is typically
installed in commercial and industrial settings where fire hazards
are present, such as data centers, server rooms, electrical control
rooms, or storage facilities. Here is a general description of a
hanging fire suppression system:
- Detection System: A variety of fire detection tools, including
smoke detectors, heat detectors, and flame detectors, are included
in the system. To keep an eye out for fire indicators, these
detectors are placed in the protected area strategically.
- Control Panel: The system's principal command center is the control
panel. In order to identify whether a fire is present, it collects
signals from the detectors and processes the data. The suppression
process begins when a fire is discovered.
- Suppression Agent: Depending on the unique requirements and
characteristics of the protected area, the suppression agent
employed in a hanging fire suppression system can change. Water,
foam, inert gases (such as nitrogen or argon), or clean agents
(such as FM200 or Novec 1230) are examples of common suppression
agents. The type of fire, the presence of priceless equipment, and
environmental considerations all have a role in the choice of
suppression agent.
- Sprinkler System: A sprinkler system might be included in a hanging
fire suppression system. When a fire is discovered, sprinkler heads
that have been placed in strategic locations throughout the
protected area are triggered. To contain or put out the fire, the
sprinklers release water or other effective suppression chemicals.
- Piping Network: To carry the suppression agent to the selected
places, a network of pipes is set up across the protected area. The
pipe system makes sure that the fire suppression ingredient is
distributed evenly, maximizing its efficiency.
- Discharge Nozzles:In order to offer the best coverage, discharge
nozzles are positioned and attached to the piping network. To
properly put out the fire, these nozzles distribute the suppression
agent in a predetermined pattern.
- Activation and Control: The suppression system is turned on when
the control panel detects the existence of a fire. In most cases,
this entails sounding an alarm to notify the inhabitants and
starting the release of the suppression agent through the piping
system and discharge nozzles. To assist fire response and
evacuation operations, the control panel may also link with other
building systems, such as HVAC or access control.
- Safety Features: Safety precautions are built into hanging fire
suppression systems to guard against unintentional discharge or
system failure. Pressure sensors, manual activation stations, and
alarms to signal system status or errors are a few examples of
these features.
- Maintenance and Inspections: Regular maintenance and inspections
are essential to ensure the proper functioning of the hanging fire
suppression system. This includes checking the pressure and
integrity of the piping network, testing the detection devices, and
verifying the functionality of the control panel.
It's important to note that the design and installation of a
hanging fire suppression system may vary depending on specific
building requirements and local fire safety regulations. Consulting
with a fire protection professional is recommended to ensure
compliance and the most effective system for a particular
application.
Applications:
Electronic computer room, a data processing center,
telecommunications facilities, process control, expensive medical
equipment, industrial equipment, library, museum and art gallery,
clean room, anechoic chamber, emergency power facilities, flammable
liquid storage area, etc.
The place where the fire is easy to happen, like paint-spraying
production line, aging-electrical equipment, rolling machine,
printing machine, oil switch, oil immersed transformer, melt
impregnating tank, tank, large generators, drying equipment, cement
production process of pulverized coal, and the ship's engine room,
cargo hold, etc.
Competitive Advantage:
1. Small but effective
2. Extremely simple installation
3. Little space for placement of it
4. Hanging on the ceiling or wall
5. Low cost for little protective zone
Compositions:
The electromagnetic hanging type fm200 fire extinguishing systems
and the temperature-based hanging type fm200 fire extinguishers are
the two different types of hanging type fm200 fire suppression
systems. They have slightly different compositions.
The fm200 cylinder, fm200 fire agent, pressure switch, solenoid
actuator, container valve, and nozzle are all parts of the
electromagnetic hanging type fm200 fire extinguisher system.
A temperature sensor, a fm200 cylinder, a fm200 fire agent, a
nozzle, and a temperature sensor make up the temperature-based
hanging type fm200 fire extinguisher.
Working principle:
The electromagnetic type:
A fire happens → smoke / heat detector catches the differences and
send signal to the control panel → control panel receives the
signal and activates the alarm bell to tell people quickly escape
from the building → after receiving both signal from smoke and heat
detector and a few seconds delay, the control panel activates the
fire extinguishing system.
The temperature-based type:
A fire happens → the inside temperature is high enough to break the
temperature sensor → the fire agent comes out and sprays from the
nozzle.
Company Introduction
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by
convenient transportation and beautiful environment, is located in
Guangzhou, which plays an important role in communication between
China and the world. We are a manufacturer, and we devote ourselves
to the study and development of HFC-227ea (FM200) productions with
our professional and mature team including the program design team,
the skillful installation team, the quality detecting team and the
after-sell service team. Nowadays, our popular fm200 products are
widely used, such as the pipe network FM200 fire suppression
system, the cabinet type FM200 fire suppression system, the
automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system
and automatic fire suppression tube. As a result of high-quality
products and services as well as the good reputation, our company
is well-received by the customers in China.
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all
products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove
all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong,
China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a
taxi or come here by subway. If you come here by subway, you need
to take the line four and get off at Shiqi station. Then walk out
the station for taking No. 126 bus and get off at Yuexi station.
