Automatic fire suppression tube for car engine
Description:
Designed to automatically suppress fires in small enclosed areas.
During a fire, the heat degrades will continue to rise and it will
melt the storage tube which contains the extinguishing agent under
pressure. The sensitive tube is made of special plastic with
stainless fittings on either end. When meet the fire, the tube will
be melted, then it will form a hole as a “nozzle”, allowing the
extinguishing agent to put out the fire. The storage tube is filled
with FM200/HFC-227ea or Novec1230 as extinguishing agent, both of
them are extremely effective, clean and people-safe extinguishing
medium. It is suitable for class A, B, C, D and E of fires. Ideal
for electric cupboards, data cupboards, switchboards, etc. It can
be installed by anyone and thus no training is required for
installation. The extinguishing agent discharges as a liquid,
disperses in the form of a gas and leaves no residue after
extinguishing. There are no clean-up costs. The agent does not
conduct electricity, corrode or cause thermal shock damage.An automatic fire suppression tube is a type of fire suppression
system that uses a tube made of a special polymer material filled
with a fire extinguishing agent to quickly and effectively
extinguish fires. The tube is installed in areas where fires are
most likely to occur, such as inside electrical panels or near
cooking equipment in kitchens.
When a fire starts, the heat from the flames causes the polymer
tube to rupture at the point nearest to the source of the fire.
This releases the fire extinguishing agent, which is then expelled
from the tube, smothering the flames and extinguishing the fire.
Automatic fire suppression tubes are easy to install and require
minimal maintenance. They are also cost-effective and do not
require any external power sources or complicated electronic
systems to operate. As a result, they are commonly used in a
variety of settings, including commercial kitchens, server rooms,
and manufacturing facilities.
Automatic fire suppression tube for car engine
Technical Specification:
| Model | Type of agent | Amount of agent(g) | Length of tube(cm) | Diameter of tube(mm) | Approximate maximum coverage (cubic meter) | Working temperature(℃) | Blasting temperature(℃) |
| XJ200H/N | Hfc-227ea/
Novec 1230 | 500±5 | 200 | 18 | 0.5 | From -40 to 80 | 110±10 |
| XJ300H/N | 750±5 | 300 | 18 | 0.75 | From -40 to 80 | 110±10 |
| XJ400H/N | 1000±10 | 400 | 18 | 1 | From -40 to 80 | 110±10 |
| XJ500H/N | 1250±10 | 500 | 18 | 1.25 | From -40 to 80 | 110±10 |
Application:
The Tube Type Automatic Fire Systems are used to protect the
relatively enclosed space, including but not limited to:
1) Engine Compartments of Boats and Yachts.
2) Engine Compartments of All On-Road Vehicles and Off-Road
Vehicles: Car, Van, Bus, Mini Bus, Truck, Rally Car, Mining Machine
or Construction Machine, etc.
3)Electric Panel, Switch Board, Sever Panel, .Control Box, etc.
Company Introduction:
Guangzhou Xingjin Fire Equipment Co., Ltd. is situated in
Guangzhou, which is vital to connection between China and the rest
of the globe. It is surrounded by excellent transportation and a
lovely environment. We are a manufacturer, and our professional and
experienced staff, which consists of the program design team, the
skillful installation team, the quality detecting team, and the
after-sell service team, is dedicated to the study and development
of HFC-227ea (FM200) products. The FM200 fire suppression system,
the cabinet type FM200 fire suppression system, the automated FM200
fire extinguisher (ceiling mounted style), the fire detecting tube
suppression system, and the automatic fire suppression tube are all
currently commonly utilized. As a result of high-quality products
and services as well as the good reputation, our company is
well-received by the customers in China.
FAQ
1)Where can you use this Tube Automatic Fire Suppression System?
Vehicle's engine room, electrical panel, server room, electrical
control cabinet, etc.
2)Are your company a manufacturer or trading company?
---We are a professional Manufacturer of automatic fire suppression
systems and fire extinguishers. We have our own factory to produce
the fire fighting equipments.
3)Can you print our logo on products?
---Yes, no problem.We also support OEM.
4)How long does it take to finish the goods?
--- Depend on order quantity, it will take about in 10-15 working
days.
5)What's your MOQ?
---Our MOQ is 100 pcs.
