Clean agent fire suppression hfc-227ea fire system
Description:
• Cabinet automatic HFC-227ea/FM200(Heptafluoropropane) fire
suppression system uses the solenoid valve as the starting mode
with the elegant appearance design. The cylinder is placed in the
cabinet. For different protection zone, according to the different
volume zone to match different size cylinder, which can reduce the
occupied area.
• According to different volume size, different extinguishing
agent, different starting mode to assemble.
• Independent sets, flexible installation, good appearance.
• Without cylinder room, can install in the protection zone, handy
and romovable.
• Automatic HFC-227ea/FM200(Heptafluoropropane) fire extinguishing
system is a set of fire extinguishing, automatic control and fire
detection in one system which is the modern intelligent automatic
fire extinguishing device.
• HFC-227ea/FM200 (Heptafluoropropane) is a kind of colourless,
tasteless, not conduct electricity and no secondary pollution gas.
It belongs to a kind of clean extinguishing agent.
• The ozone-depleting potential value is zero.
• Cleanness, low toxicity, good electrical insulation, higher fire
extinguishing efficiency.
• It is currently an ideal substitute for the halon extinguishing
agent.
Parameter:
| NO. | Specifications | Parameters |
| 1 | Cylinder capacity | 40Ltr,70Ltr,90Ltr,100Ltr,
120Ltr,150Ltr,180Ltr |
| 2 | Device model | GQQ40/2.5, GQQ70/2.5, GQQ90/2.5, GQQ100/2.5, GQQ120/2.5,
GQQ150/2.5, GQQ180/2.5 |
| 3 | Filling pressure | 2.5Mpa |
| 4 | Max filling rate | 0.95kg/L |
| 5 | Discharge time | ≤10s |
| 6 | Working temperature | 0℃~50℃ |
| 7 | Max working pressure | 4.2Mpa |
| 8 | Discharge pressure | 5.6±0.28Mpa |
| 9 | Proportion of protected zone | ≤500m² |
| 10 | Volume of protected zone | ≤1600m³ |
| 11 | Actuation | Automatic or manual start |
Cabinet Size
| Specification | Size(mm) | Volume(cbm) | Net weight (kg) |
| GQQ40/2.5 | 500×450×1450 | 0.326 | 33 |
| GQQ70/2.5 | 500×450×1450 | 0.326 | 43-50 |
| GQQ90/2.5 | 500×450×1650 | 0.371 | 43-50(46) |
| GQQ100/2.5 | 500×450×1650 | 0.371 | 55-64(54) |
| GQQ120/2.5 | 550×550×1900 | 0.575 | 60-73(60) |
| GQQ150/2.5 | 550×550×1900 | 0.575 | 80 |
| GQQ180/2.5 | 600×550×2150 | 0.71 | 80 |
Applications:
Electronic computer room, a data processing center,
telecommunications facilities, process control, expensive medical
equipment, industrial equipment, library, museum and art gallery,
clean room, anechoic chamber, emergency power facilities, flammable
liquid storage area, etc.
The place where the fire is easy to happen, like paint-spraying
production line, aging-electrical equipment, rolling machine,
printing machine, oil switch, oil immersed transformer, melt
impregnating tank, tank, large generators, drying equipment, cement
pro duction process of pulverized coal, and the ship's engine room,
cargo hold, etc.
Compositions:
Actually, a complete one set system contains two parts: the
extinguishing device(the whole composition is like the photo
beside) and electrical elements.
One set cabinet type fm200 fire suppression device is formed by the
following components: fm200 agents, a fm200 cylinder, a hoop, a
cabinet, a container valve, a solenoid actuator, a flexible
hose(high pressure hose), nozzle(s) and pressure switch.
Attentions:
There are some points users need to notice when they are using this
system.
1/ The volume of the protected zone shouldn't be bigger than 1600
cubic metres; the proportion of the protected zone should be
smaller than 500 square metres.
2/ If there some problems occur, users shouldn't fix or touch it
themselves. The best solution is to call and tell us the problems,
and wait for our professionals.
3/ Users better follow the routine check schedual that we provide.
4/ unless everthing is at its position, the cover of the small ball
valve can be unclosed.
